TCT Ripping & Framing Wood Saw Blades – 24T

1. TCT Ripping & Framing Wood Saw Blades – 24T

Fast Carbide-Tipped Cutting for Framing, Construction & General Woodworking

ALSKAR TCT Ripping & Framing Wood Saw Blades are developed for professional woodworking and construction applications where efficient wood cutting is essential.

Featuring a 24-tooth tungsten carbide tipped cutting design, this series is positioned for framing lumber, general carpentry, ripping, and everyday construction cutting tasks.

The lower tooth count helps provide efficient chip clearance during fast cutting applications, while carbide cutting tips provide wear-resistant cutting edges for compatible wood materials.

Available in two practical sizes, 6-1/2″ and 7-1/4″, the series is intended for use with compatible handheld circular saws and selected professional woodworking equipment.

2. Key Features & Benefits

1. 24-Tooth Design for Efficient Cutting

The 24T configuration is suited to cutting applications that prioritize speed and productivity over an ultra-fine surface finish.

It is particularly relevant for framing, construction lumber, and general jobsite woodworking.

2. Tungsten Carbide Tipped Teeth

Tungsten carbide cutting tips provide durable, wear-resistant cutting edges suitable for wood cutting applications.

Actual blade life and cutting performance depend on the carbide grade, tooth geometry, material, and operating conditions.

3. Framing & Ripping Applications

Designed for compatible framing and ripping tasks, including cutting dimensional lumber and suitable wood-based sheet materials.

The blade may also be used for general construction crosscuts when the finish requirements and machine setup are appropriate.

4. Two Practical Diameter Options

The series includes:

• 6-1/2″ (165mm) × 24T
• 7-1/4″ (185mm) × 24T

These configurations cover common portable circular saw sizes used in residential construction, renovation, and general carpentry.

5. Diamond Knockout Arbor — 7-1/4″ Model

The 7-1/4″ × 24T configuration features a 5/8″ arbor with a removable diamond knockout.

The factory-provided knockout may be removed when required by a compatible saw mounting system, following the manufacturer’s instructions.

The 6-1/2″ model is specified with a conventional 5/8″ round arbor.

6. Professional Jobsite Applications

Suitable for professional users carrying out repetitive wood cutting, framing installation, renovation, and general woodworking operations.

3. Recommended Materials

• Softwood
• Hardwood
• Dimensional Lumber
• Framing Lumber
• Plywood
• Oriented Strand Board (OSB)
• Compatible Wood-Based Construction Panels

Material suitability depends on the exact blade configuration and cutting conditions.

These blades are not designed for metal, concrete, masonry, or abrasive construction materials. Cutting wood containing nails, screws, or other metal objects is not an approved application unless a specific blade model has been separately validated for that purpose.

4. Recommended Applications

Framing Construction

Cutting compatible structural lumber and dimensional wood during framing and building installation.

Rip Cutting

Cutting along the grain in suitable wood materials using approved equipment and cutting procedures.

General Construction Cutting

Routine wood cutting for carpentry, renovation, and installation work.

Wood Panel Cutting

Cutting suitable plywood and OSB where production efficiency is more important than decorative finish quality.

For premium cabinetmaking, melamine-coated boards, and fine-finish crosscutting, select a dedicated higher-tooth-count saw blade.

5. Technical Specifications

6. How to Choose the Correct Blade

Step 1 — Select the Blade Diameter

Choose the 6-1/2″ or 7-1/4″ model according to the size approved for your circular saw.

Step 2 — Confirm the Arbor

Verify the spindle dimensions and mounting requirements.

The 7-1/4″ version has a removable diamond knockout; the 6-1/2″ configuration uses a round arbor.

Step 3 — Check the Material

Confirm compatibility with the intended wood material, including thickness, hardness, and any coatings or treatments.

Step 4 — Consider Cut Quality

A 24T blade is generally suited to faster, coarser cutting tasks. For finer surface finishes, consider ALSKAR General Purpose or Fine Finish TCT Wood Saw Blades.

Step 5 — Verify the Machine Requirements

Confirm the blade diameter, arbor, kerf, plate thickness, maximum operating speed, and proper installation method.

7. Operating & Safety Recommendations

• Inspect the blade body, carbide tips, and arbor before use.
• Use only blades compatible with the saw manufacturer’s specifications.
• Do not exceed the maximum RPM marked on the supplied blade.
• Use appropriate guards, flanges, and blade-clamping hardware.
• Remove a factory-provided diamond knockout only when required for the approved mounting configuration.
• Check that the blade’s rotation direction matches the saw.
• Secure the workpiece and maintain proper support.
• Use suitable eye, hearing, and respiratory protection.
• Use appropriate dust extraction.
• Do not cut hidden nails, screws, steel, or other foreign objects.
• Follow the saw manufacturer’s kickback-prevention and operating instructions.

8. Why Choose ALSKAR DIAMOND?

ALSKAR DIAMOND supplies professional cutting and drilling tools for construction, woodworking, stone fabrication, and industrial applications.

Our TCT Ripping & Framing Wood Saw Blade Series focuses on practical portable-saw sizes and 24-tooth carbide cutting configurations for everyday professional wood cutting tasks.

For product selection, machine compatibility, distributor supply, or wholesale quotations, contact ALSKAR DIAMOND with your required blade diameter, arbor configuration, cutting material, and estimated quantity.