Supreme Pro Asphalt & Green Concrete Diamond Saw Blade 14–36 in

Heavy-Duty Protection for Abrasive Cutting

The Alskar Supreme Pro Asphalt & Green Concrete Diamond Saw Blade is built for professional contractors working in demanding, highly abrasive cutting conditions.

Asphalt, green concrete and asphalt-over-concrete can generate abrasive fines and slurry that rapidly attack the steel core beneath and beside the cutting segments. If this wear progresses too quickly, the steel core can become thinner before the diamond segments are fully consumed.

To address this, the Supreme Pro Series uses a Dual Undercut Protection System combining:

Slanted Undercut Protection Segments

Specially shaped slanted diamond segments extend protection farther down toward the steel core, helping reduce wear in the critical area directly below the cutting rim.

Tungsten Carbide Inserts

Carbide protection elements provide additional resistance against abrasive wear around the core and gullet area.

Together, these two protection technologies help preserve blade stability, reduce premature core thinning and increase usable blade life in demanding abrasive applications.

1. Application-Specific Formulations

A — Asphalt

Best For

• Asphalt
• Blacktop
• Hard or soft asphalt
• Highly abrasive pavement

Positioning

Optimized for professional asphalt cutting where undercut wear is a major concern.

G — Green Concrete

Best For

• Green concrete
• Early-age concrete
• Partially cured concrete
• Abrasive fresh concrete

Positioning

Engineered for aggressive green-concrete cutting conditions where abrasive slurry can rapidly wear conventional blade cores.

AC — Asphalt over Concrete

Best For

• Asphalt overlay
• Asphalt over concrete
• Composite pavement
• Mixed pavement sections

Positioning

Balanced for applications where the blade transitions between asphalt and concrete layers.

2. Core Selling Points

Dual Undercut Protection System

Slanted protection segments and tungsten carbide inserts work together to help protect the steel core from abrasive wear.

12mm Diamond Segments

Professional usable segment height for dependable cutting life.

.187″ Heavy-Duty Width

Designed for greater stability under higher horsepower and heavier cutting loads.

35–65 HP Saw Class

Optimized for professional walk-behind saws in the heavy-duty horsepower range.

Application-Specific Performance

Choose A, G or AC based on the pavement material being cut.

Wet Cutting

Water cooling helps control heat, flush abrasive slurry and support longer blade life.

3. Recommended Applications

Asphalt
Green Concrete
Asphalt Overlay
Asphalt over Concrete
Blacktop
Other highly abrasive pavement materials

For cured concrete, customers should use a dedicated Supreme Pro Concrete Blade instead.

4. Fixed Specifications

5. RPM

6. Purchase Area Selling Points

Application-Specific Formulations

Choose the right blade for asphalt, green concrete or asphalt-over-concrete applications.

Slanted Undercut Protection

Extended protection helps defend the steel core below the cutting rim.

Tungsten Carbide Inserts

Additional wear resistance for demanding abrasive conditions.

Heavy-Duty .187″ Width

Built for higher horsepower, heavier cutting loads and professional flat sawing.

7. Protection System

Dual Undercut Protection System

1. Diamond Cutting Segment

12mm professional diamond segment

2. Slanted Undercut Protection Segment

Extends protection farther toward the steel core in the area most vulnerable to abrasive wear.

3. Tungsten Carbide Insert

Provides additional wear resistance around the steel core and gullet area.

Two Protection Technologies. One Heavy-Duty Abrasive Cutting System.

8. Premium Pro vs Supreme Pro

Premium Pro = ≤35 HP professional abrasive cutting
Supreme Pro = 35–65 HP heavy-duty abrasive cutting

9. FAQ

What materials is the Supreme Pro blade designed for?

It is designed for asphalt, green concrete, asphalt overlay and asphalt-over-concrete applications.

What does A / G / AC mean?

A = Asphalt, G = Green Concrete, AC = Asphalt over Concrete.

What is slanted undercut protection?

The slanted protection segment extends farther toward the steel core, helping reduce abrasive wear in the area directly below the cutting rim.

What do the tungsten carbide inserts do?

They provide additional resistance against abrasive wear around the steel core and gullet area.

What is the segment height?

12mm (.472″)

What is the cutting width?

.187″

What saw horsepower is recommended?

35–65 HP walk-behind saws

Is this blade for wet or dry cutting?

Wet cutting

Heavy-Duty Abrasive Cutting. Maximum Core Protection.

Protect the Core. Extend Blade Life. Keep Cutting.

Built for Asphalt, Green Concrete and Higher-Horsepower Walk-Behind Saws.