Marble Saw Blade Diamond Segments for Retipping & OEM
250–3500mm Blade Range · Marble-Specific Bond · Low Chipping · Retipping & OEM · Custom Formula
Alskar Marble Saw Blade Diamond Segments are engineered for professional retipping and OEM production of marble bridge saw, slab cutting and large-diameter block cutting blades. Covering approximately 250mm to 3500mm blade applications, the series offers marble-specific bond formulations, multiple segment geometries and size-matched dimensions for marble, limestone, travertine, onyx and other soft natural stone. Alskar segment systems are designed to balance sharp cutting, low chipping, smooth slab finish and dependable segment life across global stone-processing applications.
Request a Quote for Diamond Segments
Looking for diamond segments for gang saw blades, bridge saw blades, or core drill bits? Share your segment type, dimensions, cutting material, required quantity, and delivery destination. Our sales team will review your requirements and prepare a quotation.
1. A Complete Marble Cutting Segment Platform
The Alskar Marble Saw Blade Diamond Segment Series is designed as a global segment platform for professional marble processing rather than a single fixed replacement segment.
Marble behaves differently from granite. It is generally softer and more brittle, while many marble and limestone materials can also be relatively abrasive. For this reason, a marble segment must maintain sufficient sharpness without generating excessive cutting pressure that can contribute to edge chipping. Current suppliers specifically distinguish marble formulations on this basis rather than simply using a granite segment on softer stone.
Alskar segment selection is therefore matched to:
Stone Type + Blade Diameter + Steel Core Thickness + Machine + Required Speed / Finish / Life
2. Primary Applications
The product should be positioned primarily for:
Marble · Limestone · Travertine · Onyx · Similar Soft Natural Stone
Marble block-cutting suppliers commonly group marble with limestone, travertine and other soft stones, while specifically excluding quartz-rich hard stone from the same formulation family.
Granite and Quartzite should remain on their own dedicated Alskar segment pages.
3. Two Main Product Platforms
Unlike Granite, I don’t think Marble needs three equally prominent front-end groups. For the website, two platforms are clearer:
| Platform | Blade Diameter | Main Application |
|---|---|---|
| Series A — Bridge Saw & Slab Cutting | 250–800mm | Marble slab / edge / fabrication cutting |
| Series B — Large & Jumbo Block Cutting | 900–3500mm | Marble block-to-slab production |
Smaller marble circular blades commonly use 40mm segments, while 900mm and above frequently move to shorter 24mm segments for block cutting.
Series A — Bridge Saw & Slab Cutting Marble Segments
Recommended Global Specification Platform
| Blade Diameter | Typical Segment L × W | Recommended Height Options | Typical Qty |
|---|---|---|---|
| 250mm / 10″ | 40 × 2.6–2.8mm | 8 / 10 / 12mm | 16–17 |
| 300mm / 12″ | 40 × 2.8–3.0mm | 8 / 10 / 12mm | 21–22 |
| 350mm / 14″ | 40 × 3.0–3.2mm | 8 / 10 / 12mm | 24–25 |
| 400mm / 16″ | 40 × 3.4–3.6mm | 8 / 10 / 12mm | 28–29 |
| 450mm / 18″ | 40 × 3.8–4.2mm | 8 / 10 / 12mm | 32 |
| 500mm / 20″ | 40 × 4.0–4.2mm | 8 / 10 / 12mm | 32–36 |
| 600mm / 24″ | 40 × 4.6–4.8mm | 8 / 10 / 12mm | 42 |
| 700mm / 28″ | 40 × 5.0–5.2mm | 8 / 10 / 12mm | 42–50 |
| 800mm / 32″ | 40 × 5.5–6.0mm | 8 / 10 / 12mm | 46–57 |
Alskar Recommended Standard
10mm Segment Height — Standard Professional Choice
8mm — Economy / Fast Opening
12mm — Extended Life
Series B — Large & Jumbo Marble Block Cutting Segments
24mm Segment Length
Increasing Width with Blade Diameter
10 / 12mm Traditional Heights
15 / 20mm Available for Selected High-Life Applications
| Blade Diameter | Typical Segment L × W | Recommended Height Options | Typical Qty |
|---|---|---|---|
| 900mm | 24 × 6.5–7.5mm | 8 / 10 / 12mm | 64 |
| 1000mm | 24 × 7.0–7.5mm | 8 / 10 / 12mm | 70 |
| 1200mm | 24 × 7.5–8.5mm | 8 / 10 / 12mm | 80 |
| 1400mm | 24 × 8.5–9.0mm | 10 / 12 / 15mm | 92–96 |
| 1600mm | 24 × 9.0–9.6mm | 10 / 12 / 15 / 20mm | 104–108 |
| 1800mm | 24 × 9.5–10.0mm | 10 / 12 / 15 / 20mm | 120 |
| 2000mm | 24 × 10.5–11.0mm | 10 / 12 / 15 / 20mm | 128 |
| 2200mm | 24 × 11.0mm approx. | ||
| 12 / 15 / 20mm | 132 | 2500mm | 24 × 11.0–12.5mm | 12 / 15 / 20mm | 140 | 3000mm | 24 × 11.5–13.0mm | 12 / 15 / 20mm | 160 | 3500mm | 24 × 12.0–12.5mm | 12 / 15 / 20mm | 180 |
4. Marble-Specific Bond System
M1 — Dense / Hard Marble Formula
Maintain Sharpness + Reduce Cutting Pressure
M2 — General Marble Formula
Balanced Speed + Edge Quality + Life
M3 — Soft / Abrasive Marble Formula
Controlled Wear + Longer Segment Life
5. Segment Design Options
| Segment Design | Recommended Positioning |
|---|---|
| Flat Segment | General marble cutting |
| Sandwich Segment | Balanced sharpness and wear |
| Layered Segment | Controlled diamond exposure |
| Grooved Segment | Faster opening and slurry removal |
| Dimpled / Patterned Segment | Improved opening and cutting response |
| W-Top Segment | Easy opening / fast initial cutting |
| Tapered Segment | Selected large-diameter applications |
| Custom Geometry | OEM / machine-specific |
6. Diamond Distribution Options
Standard
Random Diamond Distribution
Premium
Layered / Patterned Diamond Distribution
Supreme
Precision Diamond Placement
Consistent Cutting Response
Controlled Diamond Exposure
Smooth Edge Quality
7. Quality Grade
| Grade | Positioning |
|---|---|
| Standard | Reliable marble cutting at competitive cost |
| Premium | Improved diamond quality, concentration and segment structure |
| Supreme | Precision diamond placement and application-specific production formula |
Segment Height ≠ Quality Grade
8. Low-Chipping & Smooth Cutting Positioning
Marble-specific Alskar segment formulations are designed to maintain a sharp cutting action with controlled cutting pressure, helping reduce edge chipping while producing smooth, flat slab surfaces.
- fast cutting
- smooth cutting
- flat slab surface
- reduced stone waste
9. Narrow Kerf & Stone Yield
Properly matched segment width provides the side clearance required for stable cutting without creating unnecessary kerf, helping reduce stone waste during slab production.
10. Wet Cutting
Cutting Method: Wet Cutting
Adequate water flow is required to control cutting temperature, remove marble slurry and maintain consistent segment performance during continuous slab and block cutting.
11. Retipping & OEM
Professional Retipping
Designed for professional retipping of marble circular saw blades where the existing steel core remains flat, properly tensioned and structurally sound.
OEM Blade Production
Segment dimensions, bond formulation, diamond concentration and geometry can be customized for new marble blade manufacturing according to the customer’s blade design and production requirements.
12. Attachment
Professional High-Frequency Brazing
13. Machine Compatibility
Bridge Saw / Edge Cutting Machine / Marble Slab Saw / Single-Blade Block Cutter / Gantry Block Cutter / Large-Diameter Marble Saw
14. Key Selling Points
Marble-Specific Cutting Formula
Designed for marble, limestone, travertine and other soft natural stone.
Global 250–3500mm Coverage
Supports bridge saw through jumbo block cutting applications.
Smooth, Low-Chipping Cutting
Sharp formulations help control cutting pressure and edge quality.
Multiple Segment Designs
Flat, sandwich, layered, patterned, W-top and custom options.
Retipping & OEM
Suitable for replacement segment installation and new blade production.
Application-Matched Formulas
Segment dimensions and bond selected according to stone, blade and machine.
15. Final Product Specifications
| Specification | Value |
|---|---|
| Product Type | Marble Saw Blade Diamond Segments |
| Parent SKU | ALK-SEG-MAR-SAW |
| Application | Marble & Soft Natural Stone Cutting |
| Use | Blade Retipping / OEM Manufacturing |
| Blade Diameter Range | Approx. |
| 250–3500mm | Bridge Saw Segment Length | 40mm typical | Block Saw Segment Length | 24mm typical | Segment Height | 8 / 10 / 12 / 15 / 20mm, application dependent | Segment Width | Size specific / custom | Segment Geometry | Flat / Sandwich / Layered / Patterned / W-Top / Tapered / Custom | Diamond Distribution | Random / Layered / Patterned / Precision | Bond Options | Dense-Hard / General / Soft-Abrasive Marble | Quality Grade | Standard / Premium / Supreme | Cutting Method | Wet Cutting | Attachment | Professional High-Frequency Brazing / OEM | Primary Materials | Marble / Limestone / Travertine / Onyx | Market | Global Stone Processing | Customization | Available |
16. FAQ
What are marble saw blade diamond segments used for?
They are used for professional retipping and OEM manufacturing of marble bridge saw, slab cutting and large-diameter block cutting blades.
What blade diameters can Alskar marble segments support?
Approximately 250mm to 3500mm, depending on the blade and application.
What segment heights are available?
Common options include 8mm, 10mm, 12mm, 15mm and 20mm depending on the application.
What materials are these segments designed to cut?
Marble, limestone, travertine, onyx and other relatively soft natural stone.
How do I select the correct marble bond?
The bond is selected according to stone density, abrasiveness, cutting speed requirement and desired blade life.
Can Alskar match my existing segment?
Yes. Provide blade diameter, steel core thickness, current segment size, number of segments, stone type and machine details.
Are these segments suitable for retipping?
Yes. They are designed for professional retipping and OEM blade production.
Do you offer custom segment sizes?
Yes. Segment dimensions, bond, geometry and diamond distribution can be customized.
Are these segments suitable for granite?
They are optimized for marble and soft natural stone. Granite should use Alskar Granite Saw Blade Diamond Segments.
What cutting method is recommended?
Wet cutting with sufficient cooling and slurry removal.
17. Get the Right Granite Segment for Your Blade
Send us your blade diameter, steel core thickness, current
segment dimensions, granite name and origin, machine information
and performance priority. Alskar will recommend a matched segment
geometry and formula.
Reviews
There are no reviews yet.