Granite Gang Saw Diamond Segments for Retipping & OEM
Granite-Specific Formula · Thin Kerf · Frame Saw Cutting · Retipping & OEM · Custom Bond
Alskar Granite Gang Saw Diamond Segments are engineered for professional retipping and OEM production of diamond gang saw blades used for black granite and selected granite block cutting. Designed for thin frame-saw blades, the series uses granite-specific metal bond formulations, premium diamond and tapered segment geometry to maintain sharpness, stable tracking and narrow kerf under demanding reciprocating cutting conditions. Segment dimensions and formulas can be matched to blade thickness, granite type, machine parameters and required production performance.
Request a Quote for Diamond Segments
Looking for diamond segments for gang saw blades, bridge saw blades, or core drill bits? Share your segment type, dimensions, cutting material, required quantity, and delivery destination. Our sales team will review your requirements and prepare a quotation.
1. Specialized Segments for Granite Gang Saw Cutting
The Alskar Granite Gang Saw Diamond Segments Series is designed for professional stone factories, gang saw retipping workshops and OEM blade manufacturers processing granite blocks with diamond-segmented frame saw systems.
Gang saw cutting places very different demands on a segment compared with circular blade cutting. Dozens of long, thin steel blades operate simultaneously in a reciprocating frame, so cutting stability, segment side clearance, blade deflection and slurry evacuation become critical.
Granite makes the application even more demanding because of its higher hardness and quartz content. Research and industrial development around granite frame-saw cutting consistently show that segment wear, feed rate, rock properties and tool design strongly affect performance.
Alskar therefore treats this as a:
Stone + Frame Blade + Machine + Performance Requirement
matched segment system.
2. Best-Fit Applications
Primary
Black Granite
Medium-Hard Granite
Selected Granite Suitable for Diamond Frame Saw Cutting
Custom Evaluation
Other Granite Types
3. Standard Reference Specification Platform
| Gang Saw Blade Thickness | Recommended Segment Size | Height Options | Position |
|---|---|---|---|
| 2.5mm | 20 × 4.2/3.7 × 8mm | 8 / 10mm | Thin blade |
| 3.0mm | 20 × 4.5/4.0 × 8mm | 8 / 10mm | Standard |
| 3.5mm | 20 × 5.0/4.5 × 8mm | 8 / 10mm | Heavy duty |
| 4.0mm | 20 × 5.5/5.0 × 8mm | 8 / 10mm | Selected machines |
Reference dimensions only. Final segment width must be matched to the steel blade thickness, side clearance and gang saw configuration.
4. Why Tapered Segment Width?
Tapered segment geometry provides the side clearance required for reciprocating gang saw cutting, helping reduce blade binding, control kerf width and maintain stable tracking through deep granite blocks.
5. Segment Height Options
8mm
Faster opening / lower cutting resistance / standard granite gangsaw configuration
10mm
More usable diamond depth / extended-life option
10mm does not automatically mean higher quality.
6. Segment Quantity
Typical Segment Quantity:
25–32 pcs / blade
Final quantity depends on blade length, machine stroke, segment spacing and cutting system.
7. Granite-Specific Bond System
GG1 — Black Granite Formula
Best for ：
Black Granite
Dense dark granite
Sharpness + stable diamond exposure
GG2 — Medium-Hard Granite Formula
Best for：
Medium-hard granite suitable for frame-saw production
Balanced speed + segment life
GG3 — Difficult Granite Formula
Best for：
Harder / quartz-rich granite after application evaluation
Faster diamond exposure + reduced glazing
Application Review Recommended
8. Diamond & Bond Technology
Alskar granite gang saw segments use high-grade industrial diamond and application-specific sintered metal bond systems designed to maintain diamond protrusion and cutting action under demanding reciprocating loads.
9. Segment Construction Options
Tapered Segment
Recommended Standard
Stable side clearance and narrow kerf.
Sandwich / Multi-Layer Segment
Improved balance between sharpness and wear.
Custom High-Performance Segment
Customized diamond concentration, layer structure and geometry for specific granite and machine conditions.
10. Thin Kerf & Stone Yield
Properly matched segment width keeps the cutting kerf narrow while maintaining sufficient side clearance, helping maximize slab yield from each granite block.
narrow cutting gap
stable cutting
reduced stone waste
11. Slab Thickness Consistency
Stable segment wear and correct blade clearance help reduce blade wandering and support more consistent slab thickness across gang saw production.
12. Wet Cutting
Continuous and sufficient water flow is required to control segment temperature, transport granite slurry out of the cutting zone and support consistent diamond exposure during gang saw production.
13. Retipping Application
Designed for professional retipping of gang saw blades that remain straight, properly tensioned and structurally suitable for reuse. Segment dimensions, taper and spacing must be matched to the original blade and machine before installation.
14. OEM Gang Saw Blade Production
For OEM blade manufacturers, Alskar can customize segment formula, width, height, diamond concentration and segment spacing according to blade thickness, granite type, gang saw design and production target.
15. Attachment Method
Professional High-Frequency Brazing
OEM Attachment Process Available
16. Machine Compatibility
Diamond Gang Saw / Frame Saw
Horizontal Granite Frame Saw
Multi-Blade Stone Frame Saw — Compatible Systems
17. Quality Grade
| Grade | Positioning |
|---|---|
| Premium | Application-specific granite formula + high-grade diamond |
| Supreme | Optimized multilayer / precision formulation for demanding production |
18. Key Selling Points
Granite-Specific Formula
Developed for black granite and selected frame-saw-compatible granite.
Thin Gang Saw Blade Compatibility
Matched to approximately 2.5–4.0mm blade thickness.
Tapered Segment Geometry
Provides controlled side clearance and narrow kerf.
Stable Slab Production
Supports straight cutting and consistent slab thickness.
Retipping & OEM
Suitable for professional replacement and new blade production.
Custom Formula
Bond and diamond system matched to granite, machine and cutting target.
19. Final Product Specifications
| Specification | Value |
|---|---|
| Product Type | Granite Gang Saw Diamond Segments |
| Parent SKU | ALK-SEG-GS-GRA |
| Application | Granite Block-to-Slab Cutting |
| Primary Materials | Black Granite / Selected Granite |
| Use | Gang Saw Blade Retipping / OEM |
| Typical Blade Thickness | Approx. |
| 2.5 / 3.0 / 3.5 / 4.0mm | Typical Segment Length | 20mm | Segment Width | Tapered / blade-specific | Segment Height | 8 / 10mm | Typical Quantity | Approx. |
| 25–32 pcs / blade | Segment Design | Tapered / Sandwich / Custom | Formula | GG1 / GG2 / GG3 | Quality Grade | Premium / Supreme | Cutting Method | Wet Cutting | Attachment | Professional Brazing | Machine | Granite Gang Saw / Frame Saw | Customization | Available |
20. FAQs
What are granite gang saw diamond segments used for?
They are used for professional retipping and OEM production of gang saw blades used for black granite and selected granite block-to-slab cutting.
What blade thicknesses can Alskar support?
Reference systems cover approximately 2.5mm, 3.0mm, 3.5mm and 4.0mm gang saw blades, with custom sizes available.
What segment heights are available?
8mm and 10mm.
Why are tapered segments used?
Tapered geometry provides the side clearance required for thin reciprocating blades and helps reduce binding and control kerf.
What granite types are supported?
Black granite, medium-hard granite and selected difficult granite after application review.
Can Alskar match an existing gang saw segment?
Yes. Provide blade thickness, current segment dimensions, segment quantity, granite type and machine information.
Are these segments suitable for retipping?
Yes. They are designed for professional gang saw blade retipping and OEM production.
What cutting method is recommended?
Wet cutting with sufficient continuous water flow.
Are custom formulas available?
Yes. Bond, diamond concentration, segment geometry and dimensions can be customized.
21. Get the Right Granite Segment for Your Blade
Send us your blade diameter, steel core thickness, current
segment dimensions, granite name and origin, machine information
and performance priority. Alskar will recommend a matched segment
geometry and formula.
| Application | Granite Gang Saw Cutting |
|---|---|
| Blade Thickness | 2.5–4.0mm / Custom |
| Segment Height | 8 / 10mm |
| Segment Design | Tapered / Sandwich / Custom |
| Formula | GG1 / GG2 / GG3 |
| Quality Grade | Premium / Supreme |
| Cutting Method | Wet Cutting |
| Use | Retipping / OEM |
| Customization | Available |
Reviews
There are no reviews yet.