Premium Scanmaskin ScanOn Diamond Grinding Shoes for Concrete Floors
The ALSKAR DIAMOND Premium Scanmaskin ScanOn Compatible Double Bar Diamond Grinding Shoes are designed for professional concrete floor grinding, surface leveling, and substrate preparation.
Featuring two straight rectangular metal-bonded diamond segments on a durable black steel backing plate, these grinding shoes provide distributed abrasive contact for consistent concrete grinding.
The rear mounting profile is designed for compatible Scanmaskin ScanOn quick-change tool holders, offering convenient tooling changes when used with the correct grinding plate.
Available in 18/20, 30/40, and 60/80 grit, with Soft, Medium, and Hard bond options for every grit, this Premium series provides nine configurations for different concrete conditions and grinding stages.
Key Features
- Premium Quality: Professional-grade metal-bond diamond grinding tooling.
- Double Bar Design: Two straight rectangular diamond grinding segments.
- ScanOn Compatible Mounting: Raised rear quick-change connection for matching Scanmaskin tool holders.
- Three Diamond Grits: 18/20 for coarse grinding, 30/40 for general grinding, and 60/80 for finer metal-bond refinement.
- Three Bond Options: Soft for hard concrete, Medium for medium-hard concrete, and Hard for soft or abrasive concrete.
- Nine Available Configurations: Each grit is offered in Soft, Medium, and Hard bond.
- Black Steel Backing: Consistent black front and rear finish.
- Concrete Applications: Floor leveling, concrete restoration, and general surface preparation.
- Machine Compatibility: Selected Scanmaskin floor grinders equipped with matching ScanOn holders.
Quality Grade: Premium
Mounting System: Scanmaskin ScanOn Compatible
Segment Design: Double Bar — 2 Diamond Segments
Diamond Grit: 18/20 | 30/40 | 60/80
Bond Hardness: Soft | Medium | Hard
Applications: Concrete Floor Grinding, Leveling & Surface Preparation
Important: Verify the installed ScanOn holder and mounting connection before ordering. ALSKAR DIAMOND supplies aftermarket compatible tooling, not original Scanmaskin equipment.
Premium Scanmaskin ScanOn Compatible Double Bar Diamond Grinding Shoes
The ALSKAR DIAMOND Premium Scanmaskin ScanOn Diamond Grinding Shoes are designed for professional concrete grinding contractors, flooring specialists, and surface preparation applications.
Each grinding shoe features two straight rectangular metal-bonded diamond segments mounted on a black steel backing plate.
The Double Bar configuration distributes abrasive contact across two grinding segments, making it a practical choice for general concrete floor grinding, surface leveling, and progressive substrate preparation.
ScanOn-Compatible Mounting
The rear of the grinding shoe incorporates a raised quick-change connection profile intended for matching Scanmaskin ScanOn tool holders.
Unlike conventional bolt-on grinding shoes, the ScanOn attachment concept uses a dedicated holder system for installing and retaining compatible grinding tools.
Premium Metal-Bond Diamond Construction
Industrial diamond abrasive particles are embedded in a metal-bond matrix.
As the matrix gradually wears during grinding, fresh diamond cutting points are exposed.
Nine Grit and Bond Configurations
The Premium series is available in:
- 18/20 Grit: Coarse concrete grinding
- 30/40 Grit: General-purpose concrete grinding
- 60/80 Grit: Finer metal-bond surface refinement
Each grit is available with Soft, Medium, and Hard bond hardness.
Professional Applications
Designed for cured concrete floor leveling, restoration, and surface preparation before appropriate polishing or coating systems.
Actual grinding performance depends on the selected grit, bond hardness, concrete characteristics, machine weight, and operating conditions.
Double Bar Diamond Segments for Professional Concrete Grinding
The ALSKAR ScanOn Compatible Grinding Shoe features two straight rectangular metal-bonded diamond segments.
Dual-Segment Grinding Contact
The Double Bar design provides two separate abrasive working surfaces.
Compared with otherwise similar single-segment tooling, a two-segment configuration generally provides a larger combined grinding contact area.
This makes Double Bar tooling a practical selection for routine concrete floor grinding and leveling.
Straight Rectangular Segment Geometry
The two rectangular grinding bars are mounted on the front of the steel backing plate.
The open space around the segments provides room for grinding residue to move away from the working surfaces.
Premium Metal-Bonded Diamond
Diamond particles are retained within a metal-bond matrix.
The matrix gradually wears during grinding to expose fresh diamond particles.
Grinding performance and tool wear depend on the concrete substrate, bond hardness, grit, grinding pressure, and operating conditions.
Black Steel Backing
The backing plate supports the grinding segments and incorporates the rear connection intended for compatible ScanOn tool holders.
Product Advantages
- Two rectangular diamond grinding segments
- Distributed abrasive contact
- Premium metal-bond diamond construction
- Black steel backing plate
- ScanOn-compatible mounting design
- Nine grit and bond configurations
- Suitable for concrete leveling and surface preparation
Always verify the tool holder and mounting profile before installation.
Diamond Grit Selection Guide – 18/20, 30/40 & 60/80
Choosing the correct diamond grit helps control grinding aggressiveness, scratch depth, and the progression between concrete grinding stages.
18/20 Grit – Coarse Grinding
18/20 grit is intended for initial concrete grinding and relatively aggressive material removal.
Typical Applications:
- Initial concrete floor grinding
- Concrete high-spot removal
- Coarse floor leveling
- Rough surface preparation
- Preparation before subsequent grinding stages
30/40 Grit – General-Purpose Grinding
30/40 grit is a versatile selection for routine concrete floor grinding.
Typical Applications:
- General concrete grinding
- Surface leveling
- Concrete floor restoration
- Reducing marks from coarser abrasives
- Preparation before finer grinding stages
60/80 Grit – Finer Metal-Bond Refinement
60/80 grit is suitable for additional concrete surface refinement.
Typical Applications:
- Reducing previous grinding scratches
- Intermediate metal-bond grinding
- Refining cured concrete surfaces
- Preparation before compatible transitional polishing tools
Recommended Grinding Progression
A common progression is:
18/20 → 30/40 → 60/80
Not every floor requires all three grinding steps.
The appropriate starting grit depends on the concrete condition, required material removal, and final surface profile.
Selection Tip: Choose the diamond grit according to the grinding stage and bond hardness according to concrete hardness and abrasiveness.
Soft, Medium & Hard Diamond Bond Selection
Correct diamond bond selection is essential for maintaining grinding efficiency and appropriate segment wear.
Metal-bond diamond grinding tools operate by gradually wearing the metal matrix to expose fresh diamond cutting points.
As a general guideline, hard concrete requires a softer bond, while soft or abrasive concrete generally requires a harder bond.
Soft Bond – Hard Concrete
Soft Bond tooling allows fresh diamond particles to become exposed more readily.
Typical Conditions:
- Hard cured concrete
- Dense concrete floors
- Floors causing harder-bond tooling to glaze
- Concrete requiring active diamond exposure
Medium Bond – Medium-Hard Concrete
Medium Bond is a general-purpose selection for moderately hard concrete.
Typical Conditions:
- General concrete grinding
- Medium-hard concrete surfaces
- Commercial and industrial concrete floors
- Routine surface restoration
Hard Bond – Soft or Abrasive Concrete
Hard Bond tooling helps reduce excessive matrix wear on softer or more abrasive concrete.
Typical Conditions:
- Soft cured concrete
- Abrasive concrete
- Floors causing rapid segment wear
- Applications requiring increased matrix wear resistance
Bond Selection Summary
| Concrete Condition | Recommended Bond |
|---|---|
| Hard Concrete | Soft Bond |
| Medium-Hard Concrete | Medium Bond |
| Soft or Abrasive Concrete | Hard Bond |
Grinding Troubleshooting
Tool glazing or poor cutting: Consider a softer bond.
Excessive segment wear: Consider a harder bond.
Deep grinding scratches: Progress to an appropriate finer grit after completing the required material removal.
Grinder weight, concrete aggregate, and operating conditions can affect the best bond selection.
Concrete Floor Grinding Applications & Recommended Materials
The ALSKAR Premium Scanmaskin ScanOn Compatible Double Bar Diamond Grinding Shoes are intended for professional concrete floor grinding, leveling, and substrate preparation.
Concrete Floor Leveling
Suitable for reducing high spots and uneven areas on cured concrete floors.
General Concrete Grinding
Designed for routine concrete grinding work in commercial, industrial, and residential renovation applications.
Concrete Surface Restoration
Useful for preparing worn, uneven, or repaired concrete surfaces before further treatment.
Progressive Metal-Bond Grinding
The 18/20, 30/40, and 60/80 grit options support coarse grinding, general grinding, and finer surface refinement.
Preparation Before Polishing
Suitable for early and intermediate grinding stages before transitioning to appropriate hybrid, ceramic, or resin-bond polishing abrasives.
Preparation Before Coatings
Can be used to prepare cured concrete substrates for compatible coating and overlay applications.
The achieved concrete surface profile must meet the coating manufacturer’s specifications.
Recommended Materials
- Cured Concrete
- Commercial Concrete Floors
- Industrial Concrete Floors
- Residential Concrete Slabs
- Compatible Cement-Based Surfaces
- Suitable Cementitious Overlays
Typical Applications
- Concrete Floor Grinding
- Surface Leveling
- Concrete High-Spot Removal
- Concrete Restoration
- General Surface Preparation
- Progressive Metal-Bond Grinding
- Preparation Before Polishing
- Preparation Before Coating Installation
Application Note: Thick epoxy coatings, flexible adhesives, heavy mastic, and similar difficult removal applications generally require dedicated PCD tooling.
These metal-bond grinding shoes are not designed to produce a final polished concrete finish on their own.
Scanmaskin ScanOn Mounting & Floor Grinder Compatibility
The ALSKAR DIAMOND Premium Scanmaskin ScanOn Compatible Double Bar Diamond Grinding Shoes are designed for professional floor grinders equipped with matching ScanOn quick-change tool holders.
The black backing plate features a raised rear mounting connection intended to engage a compatible ScanOn tool holder.
Scanmaskin Grinder References
Comparable ScanOn diamond grinding tooling is used with selected Scanmaskin floor grinding systems, including:
| Grinder / Equipment Series | Compatibility Guidance |
|---|---|
| Scanmaskin 18 / SC18 | Verify the installed ScanOn holder |
| Scanmaskin 500 / 500i Series | Verify the holder and attachment profile |
| Scanmaskin 28 World Series | Verify the Scan-On plate and connection |
| Scanmaskin 32 World Series | Verify the Scan-On plate and connection |
| Other Scanmaskin Machines | Confirm the exact tool holder and adapter |
Important: These are equipment references for the ScanOn tooling system. They are not individual fitment certifications for this ALSKAR grinding shoe.
ScanOn Quick-Change Mounting
ScanOn tooling uses a dedicated mechanical connection between the grinding segment backing and the machine’s tool holder.
The tool must be installed and retained according to the manufacturer’s instructions for the specific ScanOn plate.
Check the Actual Tool Holder
Before ordering, confirm:
- Floor grinder manufacturer and model
- Installed ScanOn holder or mounting disc
- Rear connection profile
- Tool backing dimensions
- Holder slot and retention arrangement
- Any installed adapters
ScanOn vs. Other Mounting Systems
ScanOn is not the same as:
- Husqvarna Redi Lock
- HTC EZchange
- Lavina Quick Change
- Standard Bolt-On Trapezoid
These systems should not be assumed to be interchangeable.
Installation & Safety
- Shut down and disconnect the machine before changing diamond tooling.
- Allow hot tooling to cool before handling.
- Inspect the grinding shoe and holder before installation.
- Follow the machine manufacturer’s approved ScanOn tool-changing procedure.
- Confirm the grinding shoe is fully seated and securely retained.
- Never force an incompatible shoe into a holder.
- Use suitable dust extraction and silica exposure controls when dry grinding.
- Only use wet grinding when the equipment and specific tooling are approved for wet operation.
- Stop immediately if abnormal vibration, movement, or tool damage occurs.
Need Help Confirming Compatibility?
Contact ALSKAR DIAMOND with the grinder model and a clear photograph of the installed tool holder.
ALSKAR DIAMOND ScanOn Compatible Grinding Shoes are aftermarket compatible tooling, not original Scanmaskin equipment.
ALSKAR DIAMOND Premium Grinding Solutions
ALSKAR DIAMOND supplies professional diamond tools for concrete cutting, core drilling, surface grinding, polishing, and construction applications.
Our Premium Scanmaskin ScanOn Compatible Double Bar Diamond Grinding Shoes are designed to support concrete grinding contractors with a practical combination of metal-bond diamond construction, segment geometry, grit selection, and bond hardness.
Premium Quality Product Series
The Premium series is designed for professional concrete floor grinding and surface preparation applications.
Nine Available Grit & Bond Configurations
Choose from:
- 18/20 Grit — Soft, Medium, or Hard Bond
- 30/40 Grit — Soft, Medium, or Hard Bond
- 60/80 Grit — Soft, Medium, or Hard Bond
These nine configurations allow contractors to match diamond tooling to different concrete hardness conditions and grinding stages.
Contractor & Wholesale Supply
Suitable for concrete flooring contractors, surface preparation specialists, equipment dealers, and diamond tool distributors.
Quantity & Packaging Inquiries
Order quantities, mixed specifications, and packaging arrangements can be discussed according to customer project requirements.
Professional Tool Selection Support
For product selection assistance, please provide:
- Grinder brand and model
- Installed ScanOn tool holder
- Concrete hardness or abrasiveness
- Required diamond grit
- Preferred bond hardness
- Order quantity
Contact ALSKAR DIAMOND for mounting compatibility assistance, product selection, and wholesale inquiries.
Scanmaskin ScanOn Compatibility Guide
ALSKAR DIAMOND ScanOn Compatible
Double Bar Grinding Shoes are
intended for matching ScanOn
quick-change tool holders.
The following Scanmaskin machines
are equipment references for
ScanOn grinding tool systems.
| Grinder Series | Equipment Reference | Required Check |
|---|---|---|
| Scanmaskin 18 | Selected SC18 machines | Verify ScanOn Holder |
| Scanmaskin 500 | 500 / 500i Series | Verify Connection Profile |
| Scanmaskin 28 | 28 World Series | Verify Scan-On Plate |
| Scanmaskin 32 | 32 World Series | Verify Scan-On Plate |
| Other Scanmaskin | Other equipped models | Check Actual Holder |
Important Fitment Notice
These machine references
relate to ScanOn tooling
systems and do not certify
ALSKAR fitment for every
machine configuration.
Confirm the grinder model,
installed tool holder,
rear connection profile,
mounting dimensions and
any required adapters.
ScanOn, Redi Lock, HTC EZchange,
Lavina Quick Change and conventional
bolt-on tooling are not
automatically interchangeable.
Need Help Confirming Compatibility?
Contact ALSKAR DIAMOND with
your grinder model and
a clear photograph of
the installed tool holder.
ALSKAR DIAMOND supplies aftermarket
compatible diamond tools and is
not affiliated with Scanmaskin.
Frequently Asked Questions
1. What are Scanmaskin ScanOn compatible grinding shoes?
designed for matching ScanOn
quick-change holders on selected
Scanmaskin floor grinders.They are used for concrete floor
grinding, leveling and
surface preparation.
2. What is a Double Bar diamond grinding shoe?
two diamond grinding segments.This ALSKAR product features
two straight rectangular
metal-bonded diamond segments.
3. Why choose a Double Bar grinding shoe?
provides distributed abrasive
contact for general concrete
floor grinding.Compared with otherwise similar
single-segment tooling, it may
provide a larger combined
grinding contact area.
4. Which Scanmaskin grinders use ScanOn holders?
selected Scanmaskin grinding
machines, including references
from the Scanmaskin 18,
500, 28 and 32 series.Actual holder configuration
and ALSKAR tool fitment
must be verified.
5. Is ScanOn the same as Redi Lock or HTC EZchange?
HTC EZchange are different
tool mounting arrangements.Do not assume that their tools
are directly interchangeable.
6. How do I confirm mounting compatibility?
installed tool holder,
rear mounting profile,
and retention arrangement.If unsure, send ALSKAR DIAMOND
a clear photo of your existing
holder and grinding tool.
7. Which diamond grits are available?
Double Bar Grinding Shoes are
available in 18/20, 30/40
and 60/80 grit.All three grits are available
with Soft, Medium and Hard
bond hardness.
8. When should I choose 18/20 grit?
selection for initial
concrete grinding,
high-spot removal and leveling.
9. What is 30/40 grit used for?
for general concrete grinding,
surface leveling and
routine floor preparation.
10. When should I choose 60/80 grit?
finer metal-bond grinding
and intermediate surface
refinement.It helps reduce scratches
left by coarser tooling.
11. How do I choose bond hardness?
General selection guidelines:Soft Bond: Hard concrete.
Medium Bond: Medium-hard concrete.
Hard Bond: Soft or abrasive concrete.
Concrete composition and
grinder operating conditions
also affect tool selection.
12. Can these shoes remove thick epoxy or adhesives?
Double Bar grinding shoes
are primarily intended
for concrete grinding.For thick epoxy, soft
adhesives, heavy mastic
and flexible coatings,
dedicated PCD tooling
is generally more suitable.
13. Can these grinding shoes polish concrete?
for early and intermediate
metal-bond grinding stages.A finished polished concrete
surface generally requires
additional transitional
and resin-bond polishing steps.
14. Can these tools be used wet or dry?
depends on the specific
tooling and machine.Use suitable dust extraction
and silica controls for
dry concrete grinding.Wet grinding should only
be used when the tool
and grinder are approved.
15. Can I request different order quantities?
discuss order quantities,
mixed grit and bond
selections and packaging
arrangements.Packaging and quantities
are subject to the
confirmed supply terms.
| Diamond Grit | 18/20, 30/40, 60/80 |
|---|---|
| Bond Hardness | Soft / Medium / Hard |
| Mounting System | ScanOn Compatible |
| Segment Design | Double Bar |
| Quality Grade | Premium |
| Abrasive Type | Metal-Bonded Diamond |
| Application | Concrete Grinding / Leveling / Surface Preparation |
Reviews
There are no reviews yet.