Brick Cutting
Clay bricks, facing bricks and other compatible masonry units. Material hardness and cutting finish influence blade choice.
ALSKAR DIAMOND / MASONRY CUTTING
Masonry Cutting Diamond Blades & Professional Solutions
Explore masonry cutting diamond blades for brick, concrete block, pavers and compatible masonry materials. Compare general-purpose blades, silent-core masonry blades, tuck point tools and dry masonry core bits by material, equipment, cutting width and operating method.
UNDERSTAND THE MATERIAL
Different Masonry Materials Require Different Cutting Tools
Brick, concrete block, pavers and mortar joints differ in hardness, abrasiveness and cutting requirements.
Concrete Block & CMU
Solid or hollow concrete masonry units may be highly abrasive. Select a blade suited to the exact block material.
Masonry Pavers
Compatible clay and concrete paving units require suitable cutting performance and attention to edge quality.
Mortar Joint Removal
Tuck pointing and repointing involve removing old mortar from joints without unnecessary damage to surrounding masonry.
PROFESSIONAL SELECTION GUIDE
How to Choose a Masonry Diamond Blade
Masonry blade selection begins with the material and the type of cutting operation.
- Identify the material. Check whether the work involves hard clay brick, abrasive concrete block, pavers or mortar.
- Match the machine. Select a blade suitable for the actual angle grinder, cut-off saw or masonry saw.
- Choose blade construction. Compare segmented, turbo and silent-core designs according to the task.
- Check dimensions. Verify blade diameter, arbor, cutting width and maximum RPM.
- Confirm wet or dry operation. Use the cutting method approved for both the selected blade and saw.
- For mortar removal. Select a tuck point blade according to the intended joint width and depth.
CUTTING & REMOVAL METHODS
Choose the Correct Tool for Each Masonry Operation
Cutting masonry units, removing mortar and drilling holes are different tasks.
Segmented & Turbo Blades
General-purpose segmented and turbo diamond blades are available for compatible brick, block and masonry cutting.
Explore Cutting Blades →Mortar Removal Blades
Wide segmented and sandwich-style tuck point blades are designed for mortar joint removal. Match blade width to joint dimensions.
Explore Tuck Point Tools →Dry Diamond Core Bits
Selected dry ARIX core bits are intended for suitable soft brick, CMU and soft masonry. They are not intended for reinforced concrete.
Explore Dry Core Bits →
ALSKAR MASONRY TOOL SERIES
Recommended Masonry Cutting & Drilling Tools
Explore selected ALSKAR diamond tool series for masonry cutting, mortar joint removal and approved dry drilling.
PREMIUM / GENERAL PURPOSE
Premium Sintered General Purpose Blade
Hot-pressed segmented blade for compatible concrete, brick, block, pavers and general masonry cutting.
ALK-DB-GP-SIN-PRE
View Product →
GENERAL PURPOSE / TURBO
Sintered General Purpose Turbo Diamond Blade
Turbo-rim diamond blade for suitable brick, block, pavers and general masonry cutting applications.
ALK-DB-GP-TUR
View Product →
PREMIUM / SILENT CORE
Premium Silent Core Masonry Diamond Blade
Premium masonry blade with sandwich silent core, main cutting segments and additional slant protection segments.
ALK-DB-MAS-SIL-PRE
View Product →
PROFESSIONAL / TUCK POINT
Sintered Tuck Point Diamond Blade
Wide segmented diamond blade for removing mortar from masonry joints during appropriate repointing operations.
ALK-DB-TUCK-SIN-PRO
View Product →
TUCK POINT / SANDWICH
Sandwich Tuck Point Diamond Blade
Double-layer and triple-layer diamond blade configurations for mortar removal and compatible masonry joint cleaning.
ALK-DB-TUCK-SAND
View Product →
SUPREME / DRY MASONRY
Supreme ARIX Dry Diamond Core Drill Bit
Laser-welded ARIX dry core bit for compatible soft brick, CMU and soft masonry drilling operations. Not for solid reinforced concrete.
SUPREME DRY ARIX SERIES
View Product →
Need additional blade designs, diameters or masonry cutting configurations? Explore Diamond Saw Blades →
TECHNICAL SELECTION REFERENCE
Compare Masonry Cutting Tool Types
Match the task and material before selecting diameter, arbor and the cutting method.
| Application | Tool Family | Key Selection Factors | Equipment |
|---|---|---|---|
| Brick & General Masonry | Segmented or Turbo General Purpose Blade | Material hardness, diameter, arbor, rim design and cutting method | Compatible grinder, masonry or cut-off saw |
| Concrete Block / CMU | Approved Masonry or General Purpose Blade | Abrasiveness, blade bond, block construction and machine rating | Approved masonry saw or cutting machine |
| Professional Masonry Cutting | Premium Silent Core Masonry Blade | Cutting diameter, arbor, cutting width, protection segments | Compatible masonry-cutting saw |
| Mortar Joint Removal | Sintered Tuck Point Blade | .250" kerf, joint dimensions, segment profile | Compatible joint-cleaning tool |
| Wider Mortar Joints | Sandwich Tuck Point Blade | .250" or .375" width, double or triple layer | Compatible tuck-pointing equipment |
| Soft Masonry Core Drilling | Supreme ARIX Dry Core Bit | Material compatibility, hole diameter, 9" effective depth, 5/8"-11 thread | Approved dry rotary core drill |
This reference provides general product selection guidance. Actual material compatibility, wet/dry method and maximum operating speed must be verified against the specific tool and machine instructions.
EQUIPMENT COMPATIBILITY
Choose Tools for the Correct Equipment
Masonry blades and drilling tools must match the intended machine and connection.
Angle Grinders
Select an approved blade diameter, arbor and maximum operating speed. Follow guarding and dust-control requirements.
High-Speed Cut-Off Saws
Check blade mounting, rated speed, applicable cutting materials and approved wet/dry use.
Masonry Table Saws
Verify blade size, arbor, material compatibility and the required cutting or cooling method.
Tuck Pointing Equipment
Confirm blade width, tool mounting, joint depth and the equipment's intended mortar removal operation.
Dry Masonry Core Drills
Select compatible rotary drilling equipment. Confirm thread, torque, operating speed and dust extraction.
Specialized Sawing Systems
For unusual material combinations or special mounting requirements, identify the precise saw model and tool configuration.
PROFESSIONAL OPERATING PRACTICES
Plan Your Masonry Cutting Operation
Material identification, equipment compatibility and suitable controls are essential before cutting.
Identify the Material
Determine brick, concrete block, paver or mortar type and the cutting requirement.
Select the Tool
Choose an appropriate diamond blade, tuck point blade or dry masonry core bit.
Verify Compatibility
Confirm equipment, arbor, connection, speed rating and cutting method.
Control the Operation
Apply appropriate guards, PPE, dust exposure controls and operating procedures.
Cutting brick, concrete block and mortar can create respirable crystalline silica dust. Follow applicable silica exposure control requirements and the equipment manufacturer's safety instructions. Assess potentially hazardous existing coatings or mortar before removal.
MASONRY CUTTING FAQs
Frequently Asked Questions
Common questions about brick, block, mortar removal and masonry diamond tools.
What diamond blade should I use to cut brick?
Choose a diamond blade approved for the type of brick being cut. Consider brick hardness, cutting finish, saw type, blade diameter, arbor and operating method.
Can the same blade cut brick and concrete block?
Some general-purpose masonry blades are designed for both materials. However, cutting performance depends on hardness, abrasiveness and the blade's application rating. Check the specific product.
What is the difference between segmented and turbo blades?
Segmented blades use separate cutting segments, while turbo blades use a shaped rim profile. Select according to material, desired cutting finish, equipment and approved operating conditions.
What is the advantage of a silent-core masonry blade?
A sandwich-style silent core can reduce blade-generated noise and vibration compared with some conventional blade designs. Proper hearing protection is still required where applicable.
What is a tuck point diamond blade used for?
Tuck point blades are designed for removing mortar from masonry joints during compatible cleaning and repointing operations. Their cutting width should match the joint.
What is the difference between double-layer and triple-layer sandwich tuck point blades?
The ALSKAR double-layer configuration has a nominal .250-inch cutting width, while the triple-layer configuration provides a nominal .375-inch width. Select according to the joint dimensions and equipment.
Can I use a dry masonry core bit for concrete?
Do not assume so. ALSKAR Supreme ARIX Dry Core Bits are intended for approved soft brick, CMU and soft masonry applications, not solid poured concrete or reinforced concrete.
Can masonry diamond blades cut reinforced concrete?
Not every masonry blade is designed to cut steel reinforcement. For reinforced concrete, use a blade specifically approved for the material, reinforcement and saw.
Can masonry cutting be performed wet or dry?
It depends on the selected blade and equipment. Use only the approved cutting method and follow required dust or slurry control procedures.
How can I request masonry tool recommendations or wholesale pricing?
Submit the target material, tool type, machine model, blade size or drilling dimensions, required quantity and destination through the ALSKAR online quotation form.
PROFESSIONAL MASONRY TOOLS
Need Help Selecting Masonry Cutting Tools?
Share your brick, block or mortar type, machine, blade dimensions, drilling requirements and purchasing quantity. Our team can review the application and discuss relevant ALSKAR product options.