1. Built Specifically for Marble & Soft Natural Stone

The Alskar Professional Marble Bridge Saw Diamond Blade is developed for stone fabricators cutting marble slabs and other relatively soft natural stones where fast cutting, smooth edge quality and controlled segment wear are critical.

Marble behaves differently from granite during cutting. Because softer stone can be more abrasive to the metal bond, professional marble blades commonly use a material-specific bond formulation rather than simply using a granite blade on a different material. Current specialist suppliers explicitly distinguish marble-specific bond systems from granite blades.

2. Primary Materials

Primary

Marble
Limestone
Travertine
Onyx

Secondary

Other Soft Natural Stone

3. 10mm Diamond Segments

The 10mm diamond segments provide a balanced combination of cutting efficiency, usable diamond depth and professional blade life for repeated marble slab fabrication.

4. Size-Specific Segment Width

Size-specific segment widths increase progressively with blade diameter to provide appropriate rim support, side clearance and cutting stability across the complete 14″–36″ professional range.

 

5. Why Wider Segments on Larger Blades?

Larger diameter blades experience greater lateral loading during slab cutting. Increasing the segment width provides additional support and side clearance, helping maintain stable tracking and consistent cutting performance.

6. Marble-Specific Cutting Performance

Fast + Smooth + Clean Edge

Designed specifically for marble and soft natural stone, the cutting system is optimized for fast material removal while maintaining a smooth, controlled edge with reduced chipping.

• Fast Cutting
• Smooth Edge Quality
• Controlled Segment Wear
• Stable Slab Cutting

7. Segmented Rim Design

The segmented rim helps move stone slurry away from the cutting zone while supporting efficient cooling and consistent diamond exposure during marble slab cutting.

 

8. 60/50mm Arbor

The 60/50mm arbor configuration provides compatibility with a broad range of professional bridge saws and stone fabrication equipment.

 

9. Cutting Method

Designed for wet cutting with continuous water flow to cool the blade, remove marble slurry, suppress dust and support smooth, controlled cutting during continuous fabrication work.

 

10. Standard Core Positioning

The rigid steel core provides dependable tracking and cutting stability for routine professional bridge saw production.

11. Machine Compatibility

Primary

Bridge Saw
Stone Slab Saw

Larger Diameters

Large-Format Stone Saw
Stone Cutting Machine

12. Typical Applications

Marble Slab Cutting

Fast, stable straight cutting for marble slab fabrication.

Countertop & Vanity Fabrication

Suitable for professional production of marble countertops, vanity tops and architectural components.

Limestone & Travertine Processing

Designed for softer natural stone materials requiring smooth, controlled cutting.

Architectural Stone

Suitable for repeated straight cutting in professional fabrication environments.

13. Straight Cutting

Cut Type: Straight Cutting

14. Marble Blade vs Granite Blade

15. Key Selling Points

Marble-Specific Cutting Performance

Designed for marble and soft natural stone rather than general stone cutting.

10mm Diamond Segments

Balanced cutting depth, speed and blade life for professional production.

Smooth, Low-Chipping Cuts

Optimized for clean edge quality on marble and softer stone.

Size-Specific Segment Width

Widths increase from .130″ to .255″ to support stability across larger diameters.

60/50mm Arbor

Professional mounting configuration for bridge saw equipment.

14″–36″ Professional Range

Nine size options cover standard and large-format marble fabrication.

16. Final Specifications