Diamond Wire Saws
Application-matched diamond wire for concrete cutting, granite quarrying and marble processing. Compare six product series by material, cutting task and wire construction.
9.0 mm · 37 beads/m · Plastic-Coated
Start With the Material You Cut
Choose concrete, granite or marble, then match the wire to your cutting task. Quarry extraction and stationary block processing use different configurations.
Concrete Diamond Wire
General concrete cutting and a dedicated series for heavily reinforced structures.
Explore concrete wire →
Granite Diamond Wire
Quarry block extraction and stationary single-wire block or slab processing.
Explore granite wire →Marble Diamond Wire
Spring-mounted quarry wire and plastic-coated wire for factory processing.
Explore marble wire →Match the Application Before the Diameter
Use this comparison to identify your starting point. Bead diameter and beads per meter alone do not determine material suitability or machine compatibility.
| Product / Application | Bead Ø | Beads/m | Construction | Equipment / Task |
|---|---|---|---|---|
| General Purpose Concrete | 10.5 mm | 40 | Rubber + Spring | Professional concrete wire sawGeneral concrete cutting |
| Heavily Reinforced Concrete | 10.5 mm | 40 | Rubber + Spring | Professional concrete wire sawHeavy reinforcement |
| Granite Quarry | 11.5 mm | 40 | Rubber-Coated | Quarry wire sawQuarry extraction |
| Granite Block & Slab Cutting | 10.5 mm | 40 | Plastic-Coated | Stationary single-wire / monowireFactory processing |
| Marble Quarry | 10.5 mm | 28 | Spring Assembly | Quarry wire sawQuarry extraction |
| Marble Block & Slab Cutting | 9.0 mm | 37 | Plastic-Coated | Stationary marble wire sawFactory processing |
BPM means beads per meter. For each order, confirm wire length, connection system, material, machine and operating requirements. The marble block & slab series is specified for wet cutting; follow the supplied product instructions for every other configuration.
Explore All Diamond Wire Saws
Compare the six application-specific series below. Open a product for its detailed specifications, applications and ordering information.
Showing all 6 product series.
General Purpose Concrete Diamond Wire Saw
- Bead diameter
- 10.5 mm
- Beads per meter
- 40 BPM
- Wire construction
- Rubber + Spring
Concrete walls, slabs, foundations and structural modification within the approved reinforcement capability.
View product & specifications — General Purpose Concrete Diamond Wire Saw →
Heavily Reinforced Concrete Diamond Wire Saw
- Bead diameter
- 10.5 mm
- Beads per meter
- 40 BPM
- Wire construction
- Rubber + Spring
A dedicated series for concrete structures with high steel reinforcement content and demanding section-removal projects.
Granite Quarry Diamond Wire Saw
- Bead diameter
- 11.5 mm
- Beads per meter
- 40 BPM
- Wire construction
- Rubber-Coated
Primary granite quarry cuts, block separation and natural stone extraction on compatible quarry equipment.
Granite Block & Slab Cutting Diamond Wire Saw
- Bead diameter
- 10.5 mm
- Beads per meter
- 40 BPM
- Wire construction
- Plastic-Coated
Granite block squaring, dressing and selected slab cutting on stationary single-wire / monowire machines.
Marble Quarry Diamond Wire Saw
- Bead diameter
- 10.5 mm
- Beads per meter
- 28 BPM
- Wire construction
- Spring Assembly
Primary marble quarry cuts, bench cutting, block separation and extraction on compatible quarry equipment.
View product & specifications — Marble Quarry Diamond Wire Saw →Marble Block & Slab Cutting Diamond Wire Saw
- Bead diameter
- 9.0 mm
- Beads per meter
- 37 BPM
- Wire construction
- Plastic-Coated
Premium sintered diamond wire for wet marble block squaring, sizing and slab cutting on compatible stationary machines.
No matching diamond wire found
Try a material such as marble or concrete, remove a specification, or reset the filters.
Different Cutting Tasks. Different Assemblies.
Select the complete wire configuration for the application. A similar appearance or nominal diameter does not make two wire series interchangeable.
Rubber + Spring
Used in both concrete series: 10.5 mm beads and 40 beads/m. Choose General Purpose or Heavily Reinforced according to the structure and reinforcement conditions.
Compare concrete wire →Rubber-Coated
The granite quarry configuration combines 11.5 mm beads with 40 beads/m for compatible quarry extraction and block separation applications.
View granite quarry wire →Plastic-Coated
Granite block processing: 10.5 mm / 40 beads/m. Marble block processing: 9.0 mm / 37 beads/m. Match the product to the stone and stationary machine.
Compare processing wire →Spring Assembly
The marble quarry series uses 10.5 mm beads and 28 beads/m. Its spring assembly does not, by itself, indicate approval for dry cutting.
View marble quarry wire →Quarry Wire vs. Factory Wire
Quarry wire is selected for extraction and primary block separation. Factory wire is selected for stationary block squaring, dressing and compatible slab cutting. Confirm the machine, stone type and complete assembly before changing between applications.
Single-Wire vs. Multi-Wire Machines
The granite block & slab series is intended for stationary single-wire / monowire processing. Multi-wire slab saws require separate compatibility review. Provide the machine model and required wire configuration when requesting a recommendation.
Build Your Order Around the Cutting Job
ALSKAR DIAMOND supports professional buyers selecting diamond wire for construction projects, quarry operations and stone-processing facilities.
Contractors, Quarries & Stone Factories
- Match the wire series to the concrete or natural stone.
- Review reinforcement content or the stone variety.
- Specify machine model, wire length and connection requirements.
- Discuss a suitable configuration for your cutting task.
Distributors & Wholesale Buyers
- Compare six clearly defined product series.
- Specify your required quantity in meters or configured loops.
- Confirm the supplied configuration and packaging requirements.
- Request availability, lead time and an order-specific quotation.
Diamond Wire Saw FAQ
How do I choose the correct diamond wire saw?
Start with the material and task: concrete cutting, quarry extraction or stationary stone processing. Then confirm reinforcement content or stone variety, machine model, bead diameter, beads per meter, wire construction, required length and connection system.
What is the difference between the two concrete wire series?
Both listed series use 10.5 mm beads, 40 beads/m and a Rubber + Spring assembly. General Purpose is intended for routine concrete cutting within its approved capability. Heavily Reinforced Concrete is a separate series for high steel reinforcement content. Select by application, not by shared external dimensions.
Can I use quarry wire for block and slab processing?
The quarry and factory-processing series have different applications and configurations. Granite quarry wire is 11.5 mm / 40 beads/m / rubber-coated, while granite block-processing wire is 10.5 mm / 40 beads/m / plastic-coated. Confirm product and machine compatibility before substituting one for another.
What are the specifications of the marble block & slab cutting wire?
The Premium marble block & slab series uses 9.0 mm sintered diamond beads, 37 beads per meter and plastic-coated construction. It is intended for wet cutting of marble on compatible stationary equipment. Wire length can be specified for the machine.
Are the block & slab wires suitable for multi-wire saws?
Do not assume multi-wire compatibility. The granite processing series is intended for stationary single-wire / monowire machines. For any multi-wire slab saw, provide the exact machine model and required configuration for a separate compatibility review.
Are all diamond wires suitable for dry cutting?
No. The marble block & slab product is specified for wet cutting. For the other products, follow the approved cutting and cooling instructions for the exact supplied wire and machine. Coating or spring construction alone does not establish dry-cutting suitability.
Can I order a specific wire length or request a wholesale quotation?
Yes. Send the product or application, material details, machine model, required wire length, connection requirements and order quantity. ALSKAR will confirm the available configuration and quotation for your order.
What do bead diameter and BPM mean?
Bead diameter is the nominal outside diameter of the diamond cutting bead. BPM means beads per meter of wire. Neither value describes the internal steel cable diameter, and neither alone determines cutting suitability or performance.
Need Help Choosing Your Diamond Wire?
Tell us what you cut and which machine you use. Include the details below so we can review the application and prepare a relevant quotation.
Concrete type and reinforcement, or granite / marble variety; quarry extraction, block squaring, slab cutting or structural section removal.
Machine manufacturer, model and power; quarry, stationary single-wire or another system; relevant pulley and connection requirements.
Preferred product, bead diameter, beads per meter, wire construction, required length and open-wire or loop configuration.
Quantity in meters or loops, delivery destination, project timing and any packaging requirements.
info@alskardiamond.com · The email button opens your email application with an inquiry template.