Professional Granite Bridge Saw Diamond Blade 14–40 in

1. Built for Professional Granite Fabrication

The Alskar Granite Bridge Saw Diamond Blade is designed for professional stone fabrication shops requiring reliable straight cutting performance across granite slabs and other hard natural stone materials.

Unlike small-diameter handheld stone blades, large bridge-saw blades must maintain cutting stability over a much greater diameter. The Alskar series therefore uses size-specific segment widths, increasing progressively as blade diameter increases to provide the rigidity, side clearance and cutting support required for stable slab production.

The series covers diameters from 14″ to 40″, making it suitable for both standard bridge saw applications and large-format stone cutting.

2. Granite-Focused Cutting Performance

The diamond segment formulation is designed for granite and hard natural stone, providing a balanced combination of cutting speed, diamond exposure, segment wear and blade life.

Primary applications:

Granite Slabs
Hard Natural Stone
Stone Fabrication
Straight Slab Cutting

Granite fabrication specialist

 

3. 15mm Diamond Segments

15mm diamond segments provide substantial usable cutting depth for repeated professional granite slab cutting, supporting dependable blade life in production environments.

• 15mm Segment Height
• Professional Cutting Depth
• Designed for Repeated Slab Production

4. Size-Specific Segment Width

Progressively wider diamond segments help maintain blade stability and cutting strength as diameter increases, providing balanced performance from standard bridge saw sizes through large-format slab cutting.

 

5. Why Segment Width Increases with Diameter

Larger blade diameters generate greater lateral load during cutting. Increasing the segment width helps provide additional rim support, appropriate side clearance and improved tracking stability for straight slab cutting.

6. Segmented Rim Design

The open segmented rim helps improve slurry evacuation and cooling through the cutting zone while maintaining consistent diamond exposure during granite slab cutting.

• Slurry Evacuation
• Cooling Efficiency
• Stable Cutting

7. Standard Steel Core

A rigid standard steel core provides dependable blade stability for routine professional bridge saw production while maintaining a more economical price point than a silent-core construction.

8. Professional 60mm Arbor

The professional 60mm arbor configuration is designed for bridge saws and stone fabrication equipment commonly used in granite slab processing.

9. Wet Cutting

Designed for wet cutting with continuous water flow to cool the diamond segments, flush stone slurry from the cutting zone and support stable performance during long production cuts.

10. Primary Materials

Primary

Granite
Hard Natural Stone

Secondary

Selected Engineered Stone
Selected Natural Stone

11. Typical Applications

Granite Slab Cutting

Designed for straight, stable production cutting of granite slabs in fabrication shops.

Stone Fabrication

Suitable for professional countertop, architectural stone and slab-processing applications.

Large-Format Stone Cutting

Diameters up to 40″ support larger slab-cutting equipment and deeper cutting requirements.

Production Cutting

Designed for repeated bridge saw use where cutting stability, predictable wear and blade life are important.

12. Machine Compatibility

Bridge Saw
Stone Slab Saw
Large-Format Stone Saw

13. Straight Cutting Positioning

Engineered primarily for straight slab cutting, the blade provides stable tracking and controlled cutting performance across long granite production cuts.

14. Key Selling Points

Professional Granite Cutting

Engineered specifically for granite slabs and hard natural stone.

15mm Diamond Segments

Substantial usable diamond depth for professional production cutting.

Size-Specific Segment Width

Widths from .130″ to .250″ provide appropriate support across 14″–40″ sizes.

Standard Steel Core

Rigid, dependable construction with strong professional value.

60mm Arbor

Designed for professional bridge saw and stone fabrication equipment.

Complete 14″–40″ Range

Ten diameter options support standard through large-format stone fabrication.

15. Final Specifications