Vacuum Brazed Multi-Purpose Diamond Blade 4–10 in

1. One Blade for Multiple Jobsite Materials

The Alskar Vacuum Brazed Multi-Purpose Diamond Blade is designed for contractors and professional users who regularly encounter different materials during cutting work.

Unlike conventional bonded abrasive wheels or sintered diamond blades designed around a narrow material range, vacuum brazing exposes the diamond particles directly at the cutting surface.

This provides an aggressive cutting action across materials such as:

Steel & Metal
Cast Iron
Rebar
PVC & Plastic
Concrete & Masonry
Granite & Stone
Fiber Cement Materials

2. Vacuum Brazed Diamond Technology

Exposed Diamond for Aggressive Cutting

Industrial diamond particles are vacuum-brazed directly to the steel cutting rim, leaving more diamond exposed at the cutting surface for aggressive cutting across tough and mixed materials.

• High initial cutting speed
• Aggressive material removal
• Multi-material capability
• Consistent cutting diameter
• Useful for difficult materials

3. Segmented / Slotted Brazed Rim

The slotted rim design helps improve debris evacuation and heat management while maintaining aggressive cutting performance across demanding materials.

4. .120″ Vacuum Brazed Rim Height

Brazed Rim Height: .120″ (Approx. 3mm)

The approximately 3mm vacuum-brazed cutting zone provides an exposed diamond working surface designed for aggressive multi-material cutting.

5. Size-Specific Cutting Width

Size-specific cutting widths balance cutting speed, blade stability and durability across the complete 4″–10″ diameter range.

6. Primary Materials

Primary

Steel & Metal
Cast Iron
Rebar
PVC / Plastic

Secondary

Concrete
Masonry
Stone
Granite
Fiber Cement

7. Metal Cutting

Steel & Metal

Vacuum-brazed exposed diamond provides an aggressive cutting edge for steel sections, pipe, sheet material and general metal-cutting applications.

Cast Iron

Suitable for pipe repair, demolition and maintenance applications where conventional abrasive wheels may wear rapidly.

Rebar

Useful for mixed-material jobs involving steel reinforcement and construction materials.

8. Plastic & PVC

The solid steel core and exposed diamond cutting edge provide controlled cutting of PVC, HDPE and other plastic materials without the rapid diameter loss associated with conventional bonded abrasive wheels.

9. Concrete, Masonry & Stone

Suitable for intermittent cutting of concrete, masonry, granite and stone when multi-material versatility is required. For high-production concrete cutting, use a dedicated Alskar concrete diamond blade matched to the application.

10. Multi-Purpose vs General Purpose

General Purpose Diamond Blade

Best for:

Concrete / Brick / Block / Masonry

Long life in construction materials

Vacuum Brazed Multi-Purpose Blade

Best for:

Metal / Plastic / Mixed Materials / Demolition

Versatility + aggressive cutting

11. Typical Applications

Construction & Renovation

Cut multiple materials without repeatedly changing blades.

Demolition

Useful when material composition changes between steel, masonry, plastics and construction products.

Plumbing & Utility Work

Suitable for cast iron, PVC, pipe and mixed construction materials.

Metal Fabrication & Maintenance

Useful for steel, iron and other difficult materials.

Rescue / Emergency Applications

Vacuum-brazed multi-material blades are also commonly used in rescue-style applications because of their ability to cut varied materials.OXCraft

12. Machine Compatibility

4″–5″

Angle Grinder

6″–7″

Angle Grinder / Circular Saw

8″–10″

Circular Saw / Cut-Off Saw / Stationary Saw

Always verify blade diameter, arbor size and maximum machine RPM before use.

13. Key Selling Points

Vacuum Brazed Diamond Technology

Exposed industrial diamond provides aggressive cutting across tough materials.

Multi-Material Capability

Cuts metal, plastic, masonry, concrete, stone and other jobsite materials.

Slotted Brazed Rim

Improves debris evacuation and helps manage heat during cutting.

Approx. 3mm Brazed Rim

.120" vacuum-brazed cutting zone across all sizes.

Size-Specific Cutting Width

.075" to .100" widths balance speed and blade stability.

4″–10″ Range

Eight diameter options cover handheld and stationary cutting equipment.

14. Final Specifications