Granite Sandstone Slab Multi Wire Saw Cutting Diamond Wire
Granite Sandstone Slab Multi Wire Saw Cutting Diamond Wire
Description
| Type:: | Diamond Cutting Wire | Application: | Granite Stone Squaring And Profilling |
|---|---|---|---|
| Process: | Sintered | Bead Size: | 8.5mm |
| Bead Number: | 37 Beads | Quality: | Supreme |
| High Light: |
Granite Cutting Diamond Wire, 37 Beads Cutting Diamond Wire, 8.5mm Sandstone Wire Saw Rope |
||
Multi Wire Saw Cutting Diamond Wire For Granite Slab Sandstone Slab
1. Granite Multi Cutting Diamond Wire Description
Diamond wires are cutting tools for rocks (marble, granite etc.), concrete and substitutes of saws in general. They are composed of an AISI 316 stainless steel cable over which are assembled diamond sintered pearls with 10 to 12 mm in diameter spaced 25 mm between each one. The wire is passed through coplanar holes previously made in the rock, and the tension imposed to the wire is made by a motor mounted on trails, coupled to the cutting system. The utilization of this slabbing technology has been expanded all over the world due to its advantages on the other techniques.
Diamond multi-cutting wire saws are suitable for cutting the different kinds of large granite slabs, compare with the gang saw slab cutting, multi wire sawing will be more productive and efficient.
Our granite multi sawing wire has 37 beads per meter, reforced by rubber and spring, 37 beads per meter provide excellent supreme quality diamond wire for granite sand stone slab cutting.
2. Specificaiton of Multi Wire Sawing Diamond Wire
|
Code No. |
Specificaiton | Character |
| VDW-GM/P01
|
8.5mm x 37 beads | Soft bond for hardest granite stone |
| VDW-GM/P02
|
8.5mm x 37 beads | Medium bond for medium hard stone |
| VDW-GM/P03
|
8.5mm x 37 beads | Medium to hard bond to medium to soft stone |
3. Generally Cutting Data
| Code Number | Cutting Material | Line Speed
|
Cutting Speed | Wire Life |
| VDW-GM/P01
|
Hard granite | 25-32m/s | 0.5-0.7㎡/h | 6-9㎡/m |
| VDW-GM/P02
|
Medium granite | 25-32m/s | 0.6-1.2㎡/h | 9-11㎡/m |
| VDW-GM/P03
|
Soft granite | 25-32m/s | 1.0-1.6㎡/h | 11-15㎡/m |
4. Other Note
All diamond tipped cutting tools work best at a given surface feet per minute range, diamond wire operates best at a speed ranging between 4800 to 5500SFM. At this speed, material removal rate, cut time, power requirments and diamond bead wear are all optimized. Slower wire speeds are suggested at the beginning and end of cuts to reduce stress on the wire and wire sawing equipment and to allow for better control of the wire.
